Overflow
Box Sets
These sets
utilize a single U tube. I do not recommend using the black sponges
pictured. Remove them & only use the
PVC pipe inside the sponge.
Use Flex Hose (below) or 1" PVC to connect
to bottom of the box set to dump to dump the water to your sump. |
| * |
Premium overflow
boxes for overflow systems |
| * |
Effectively
transports aquarium water to under cabinet sumps |
| * |
Bulkhead fittings
allow convenient and secure aquarium plumbing |
Quality overflow box sets feature bulkhead fittings for
secure and convenient installation.
Easy-to-install
overflow boxes transport aquarium water to under cabinet sumps,
refugiums etc. Gravity feed system eliminates the need for
complicated drilling or aquarium modifications. Slim
design needs only 3 inches of wall clearance. Includes: U-tube(s), nylon screws and wing
nuts, pre-filter box, and 1" bulkheads.
Note: Keep in mind
when ordering ... the MINIMUM turnover rate for any tank is 10
times per hour! Example: 75g tank x 10x = 750 GPH
(gallons per hour). Use 2 PH800 (best) or one PH1000 (ok).
More GPH is always better! |
|
|
PF-800
8" x 3" x 10" H
Single 1.25" U Tube
600
GPH
Single Outflow - needs single dump tube
Available:
On-line
In Store |
|
|
PF-1000
9" x 3" x 10" H
Single 1.5" U Tube
800 GPH
Double Outflow - needs 2 dump tubes
Available:
On-line
In Store |
|
 |
Flex Hose
One inch diameter connector ends
Mounts on the bottom of the overflow box set & funnels water down to
your sump.
Single outflow units use 1 hose
Double outflow units use 2 hoses |
|
Available:
On-line
In Store |
|
|
Available:
On-line Only |
|
|
Most Use This Size
Available:
On-line
In Store |
|
|
Available:
On-line Only |
|
Shop
