Chillers:
Available On-Line Only
Controlling your tank temperature especially in the summer months is
critical. Tank with temps over 82 degrees experience a dramatic
decrease in oxygen saturation. This means all life forms in the tank
are at risk of dying. Though chillers are effective in controlling
tank temps I still recommend considering installing an air conditioner in
the room. Most, if not all, have economy settings which turn them off
once the desired temp setting is reached. If there is no window to
install into, Sears has a portable room conditioner that would work as well.
Air conditioners are WAY less expensive than chillers & not only will keep
our tanks (& you!) cool but are super at dehumidification as well.
Understanding that some folks may have cathedral ceilings etc. which may
make an air conditioner an impossibility I've chosen to offer a few good
chiller options below.
|

Recommended tank size <55 gal
50 Watts of Cooling Power
Easy Bulkhead Installation (will need to drill)
Quiet, Efficient & Reliable
Environmentally Friendly
With its threaded probe, nylon nut, and silicon washer, the IceProbe can
be easily bulkheaded through a 1.25 inch hole into syphon overflows,
prefilters, sumps, or even directly into plastic aquariums.
In typical aquariums, one IceProbe can reduce the temperature of 10
gallons of water 6 to 8 F, 20 gallons of water 3 to 4 F, and 40 gallons
of water 1 to 2 F. Multiple IceProbes are commonly used in aquariums
over 20 gallons to achieve higher temperature differentials.
NOTE: This chiller does not include a controller. Usually if the chiller
is cooling the water too much you can just set your heater up a little
to compensate. They do offer an optional controller offered below
here... |
|

Temperature Controller for IceProbe Small
Aquarium Chiller. Allows you the ability to set a target
temperature between 65 to 85 F while using CoolWorks IceProbe Small
Aquarium Chiller. |
|

Recommended tank size <170 gal
• High Quality, Durable & Reliable
• Integrated Dual Stage Thermostat
• Digital Display for Precise Temperature Control
• Quiet – Low Noise
• High BTU Ratings (Heat Removal)
• Removable, Easy to Clean Air Filter
• Heater Control Power Outlet (Heater Not Included)
• Includes Fittings & Instructions for Easy Set Up
Specifications
Dimensions: 12.8" x 14.2" x 19.5"
Inlet/Outlet: 3/4" & 3/4"
BTU: 3200
Chilling Capability: 100g up to 30degree / 170 up to 10degree
Thermostat: Dual
Amps/Volts: 3.5/110
Flow Rate: min 590 gph / max 1057 gph |
|

Recommended tank size <200 gal
Unique & creative design with ABS casing
proven to be safe and reliable. Use of National & Mitsubishi compressors
provide economy & durability. Thermal converter is made of pure titanium
pipe, which has excellent corrosion resistance, is suitable for
refrigerating both fresh and saltwater. Intelligent control system,
precise display and easy operation. Socket for external connection. once
heater is attached, it is controlled by the internal thermostat. The air
filter prevents the chiller from being affected by dirt, thus keeping it
in good condition for heat diffusion. The air filter can be easily
disassembled for cleaning.
Power-1/3 hp
Voltage-AC115V/60Hz
Required pump flow-600-900gal/hr
Amp- 4.2
Water inlet/outlet- 5/8"-3/4" |
|